Image Source: chargedevs.com

Key Takeaways

  • Murata’s new MGJ2T2 series consists of 2 W isolated DC-DC converters designed specifically for silicon carbide (SiC) MOSFET gate drivers.
  • These converters feature a 24 V input and unique +18 V/-3 V bipolar outputs, critical for efficient SiC device switching.
  • Engineered for high-voltage applications such as energy storage, motor drives, and EV charging, they ensure robust isolation and mitigate electrical noise.
  • Proprietary Block-Coil technology provides over 8 mm creepage and clearance, limiting isolation capacitance to 2.5 pF and achieving common-mode transient immunity (CMTI) exceeding 200 kV/μs.
  • The MGJ2T2 series supports reinforced insulation up to 800 Vrms and basic insulation up to 1,600 Vrms, tested to withstand 6 kV DC, ensuring safety and reliability in demanding environments.

BENGALURU, November 19, 2026 – In a significant development for high-voltage power electronics, Murata Manufacturing, a global leader in electronic components, has officially launched its groundbreaking MGJ2T2 series of 2 W isolated DC-DC converters. These innovative components are specifically engineered to power silicon carbide (SiC) MOSFET gate drivers, addressing critical performance and safety requirements in an array of demanding applications.

Targeting the rapidly expanding sectors of energy storage and distribution, sophisticated motor drives, and advanced electric vehicle (EV) charging infrastructure, the MGJ2T2 series promises enhanced efficiency and reliability for next-generation power systems. The introduction marks a crucial step forward in optimising the performance of SiC-based power converters.

Precision Power for SiC Gate Drives

The MGJ2T2 series is designed to operate from a standard 24 V input, delivering a precisely regulated +18 V/-3 V bipolar output. This specific voltage configuration is vital for the optimal functioning of SiC MOSFETs, which are renowned for their superior performance in high-power applications.

The positive +18 V rail provides the necessary voltage to efficiently turn the power device on, ensuring rapid and complete conduction. Simultaneously, the negative -3 V rail supports the critical turn-off process, facilitating swift and controlled shutdown of the SiC MOSFET. This bipolar output design is instrumental in preventing spurious turn-on events and minimising switching losses, thereby enhancing overall system efficiency.

Mitigating Noise: The Isolation Imperative

One of the inherent challenges with SiC-based power converters is their exceptionally fast switching speeds. While beneficial for efficiency and compactness, these rapid voltage changes can generate significant electrical noise, which can capacitively couple across the isolation barrier between the high-power stage and its sensitive control circuitry.

Such noise coupling can lead to erratic operation, reduced reliability, and potential safety hazards. The MGJ2T2 isolated DC-DC converters directly address this issue with their remarkably low isolation capacitance of just 2.5 pF. This minimal capacitance effectively limits the propagation of common-mode noise, ensuring signal integrity across the isolation boundary.

Unmatched Common-Mode Transient Immunity (CMTI)

Further bolstering its noise immunity, the MGJ2T2 series boasts an impressive common-mode transient immunity (CMTI) of more than 200 kV/μs. This high CMTI rating signifies the converter’s robust ability to tolerate rapid common-mode voltage transitions, which are characteristic of modern, high-speed power switching applications. The superior CMTI ensures that the control signals remain undisturbed even in electrically noisy environments, crucial for the reliable operation of SiC gate drives.

Innovation in Isolation: Murata’s Block-Coil Technology

At the heart of the MGJ2T2’s exceptional performance lies Murata’s proprietary Block-Coil technology. This innovative construction method sets a new benchmark for isolation integrity and component reliability. Unlike conventional designs, Block-Coil technology employs separate windings formed on solid insulating formers.

This meticulous construction provides a tangible physical separation between the primary and secondary circuits. The design inherently reduces the parasitic capacitance between these circuits, directly contributing to the converter’s low isolation capacitance and high CMTI. The robust solid insulation barrier also delivers high partial-discharge tolerance, extending the operational lifespan and reliability of the device under high-voltage stress.

Ensuring Robustness: Creepage and Clearance

Beyond the advanced coil design, the MGJ2T2 series prioritises physical safety and long-term stability. The construction provides more than 8 mm of creepage and clearance. Creepage distance refers to the shortest path along the surface of an insulator between two conductive parts, while clearance distance is the shortest path through air. These substantial distances are critical for preventing electrical arcing and ensuring reliable insulation, particularly in high-voltage environments where contaminants or humidity could compromise performance.

Safety and Standards Compliance

The MGJ2T2 series is engineered to meet stringent international safety standards, making it suitable for a wide array of industrial and automotive applications. It supports reinforced insulation at working voltages up to 800 Vrms, providing a high level of protection against electric shock. For less critical applications, it offers basic insulation up to 1,600 Vrms working voltage.

Each unit is rigorously tested to withstand a formidable 6 kV DC across its isolation barrier, underscoring its robust insulation capabilities. Furthermore, the design conforms to IEC 60664-1, a crucial standard for insulation coordination in low-voltage equipment. These characteristics enable the gate-drive supply to operate safely and reliably even when the control electronics and the SiC power stage are at significantly different voltage potentials, a common scenario in complex power systems.

Enabling Next-Generation Architectures: Solid-State Transformers

The advanced characteristics of the MGJ2T2 series are particularly relevant for emerging power architectures, notably Solid-State Transformers (SSTs). SSTs represent a paradigm shift in power conversion, utilising high-frequency power conversion techniques to replace traditional, bulky low-frequency transformers.

These sophisticated systems often divide high input voltages across multiple cascaded switching stages. Each individual switching element within an SST architecture necessitates its own dedicated and precisely isolated gate-drive power supply. The MGJ2T2’s superior isolation, low capacitance, and robust design make it an ideal choice for empowering the numerous isolated gate drivers required in these high-efficiency, multi-stage SST implementations, fostering innovation in smart grids and renewable energy integration.

Operational Durability and Packaging

Designed for demanding industrial and automotive environments, the MGJ2T2 series maintains its performance across a broad temperature range, from -40° C to an extreme +125° C. This wide operating range ensures reliability even under harsh thermal conditions, a critical factor for automotive and industrial power applications.

The converters are supplied in a compact single in-line package (SIP), optimising board space and simplifying integration into existing designs. This form factor, combined with its robust electrical characteristics, positions the MGJ2T2 as a highly versatile component for designers seeking to leverage the full potential of SiC technology.

With the introduction of the MGJ2T2 series, Murata reinforces its commitment to advancing power electronics, providing robust and reliable isolated DC-DC converters essential for the safe and efficient operation of SiC gate drives in the evolving landscape of high-voltage applications.

Frequently Asked Questions (FAQ)

What is the primary function of Murata’s MGJ2T2 series?

The MGJ2T2 series consists of 2 W isolated DC-DC converters primarily designed to provide a stable, isolated power supply for silicon carbide (SiC) MOSFET gate drivers in high-voltage applications. They ensure precise control and electrical isolation between the power and control circuits.

Why are bipolar outputs (+18 V/-3 V) important for SiC MOSFETs?

Bipolar outputs are crucial for optimal SiC MOSFET operation. The +18 V ensures rapid turn-on and full conduction, while the -3 V negative bias ensures a swift, reliable turn-off, preventing spurious switching and minimizing power losses, thus enhancing efficiency.

How does the MGJ2T2 series address electrical noise in SiC applications?

The MGJ2T2 series features a very low isolation capacitance of 2.5 pF and a high common-mode transient immunity (CMTI) exceeding 200 kV/μs. These specifications effectively minimise electrical noise coupling across the isolation barrier, ensuring signal integrity and stable operation.

What is Murata’s Block-Coil technology and its benefits?

Block-Coil technology is Murata’s proprietary construction method using separate windings on solid insulating formers. It provides physical separation, reduces capacitance, ensures over 8 mm creepage and clearance, and offers high partial-discharge tolerance, enhancing isolation integrity and long-term reliability.

What insulation capabilities does the MGJ2T2 series offer?

The converters provide reinforced insulation up to 800 Vrms and basic insulation up to 1,600 Vrms working voltage. They are tested to withstand 6 kV DC across the isolation barrier and are designed to meet IEC 60664-1, ensuring high safety standards in diverse voltage potential scenarios.

In what applications is the MGJ2T2 series particularly useful?

The MGJ2T2 series is highly relevant for high-voltage applications including energy storage and distribution systems, advanced motor drives, and electric vehicle (EV) charging infrastructure. Its robust isolation and performance also make it ideal for emerging Solid-State Transformer (SST) architectures.

What is the operating temperature range for these converters?

The MGJ2T2 series is designed for robust operation across a wide industrial temperature range, from -40° C to +125° C. This broad range ensures reliable performance in demanding environmental conditions often found in automotive and industrial settings.

Created with ❤